Removable safety bollards — floor-mount protective bollard 45 cm, black, for permanent display plinths and showcases

When an artwork rests on a low plinth or stands behind a showcase, the area to protect is subtle yet the risk of accidental contact is real. This removable safety bollard — the LINE MINI FIX model in black, 45 cm tall — answers exactly that need: anchored into the floor via a three-screw floor plate, standing just 45 cm high, it draws a permanent, low boundary around the plinth or showcase without ever diverting the visitor's gaze from the exhibited piece. Its deep matte black RAL 9005 finish asserts the boundary while receding before the object on display.

A fixed-mount bollard designed for low-level displays

The MINI FIX format was conceived for low-height exhibition elements: plinths, flat showcases, architectural models, silversmithing pieces, design objects, or numismatic collections. At 45 cm from the floor, the bollard establishes a polite standoff distance sufficient to discourage contact without masking the artwork's base or creating a cage effect. Because it is permanently floor-mounted, it suits displays that do not change from season to season and require a stable, clean, and reliable boundary around a precise point. Its very low mass — around 1 kg — plays no role in its stability: the floor fixation alone guarantees long-term firmness.

RAL 9005 black — a graphic boundary that protects without dominating

The deep matte black acts as a sharp graphic line around the plinth. Placed against a light wall, a neutral backdrop, or an illuminated showcase, it cuts the protected zone with precision and naturally guides visitors to a respectful distance. On a dark pathway or a high-contrast scenography, it dissolves into the shadows and lets the lighting concentrate all attention on the piece itself. The slender Ø 25 mm tube maintains a lightweight silhouette that never competes visually with the displayed object.

The 6 mm semi-elastic rope

A 6 mm semi-elastic rope clips onto the top of each bollard, tracing a low, straight, and clean line from post to post. Flexible to the touch, it absorbs impacts: a visitor who brushes against it is not hurt and is not at risk of a fall. For plinth-protection contexts, the black rope extends the graphic language of the bollard, while a red or dark grey tone reinforces the warning signal around a particularly fragile piece. Available colours include black, white, grey, red, blue, green, and yellow. The rope must be ordered separately.

Permanent fixation via three-screw floor plate

Unlike mobile weighted-base models, the MINI FIX is screwed directly into the floor via a three-screw floor plate. This fixation eliminates any footprint on the floor, frees movement around the plinth, and guarantees a rigorously stable position over time. The marker thus obtained cannot be displaced, cannot be knocked over, and stays aligned exhibition after exhibition — making it the ideal solution for the lasting protection of a permanently installed showcase or display unit.

Technical specifications

• Model: LINE MINI FIX, floor-mount bollard
• Height: 45 cm — low format for plinths and showcases
• Finish: matte black RAL 9005
• Tube diameter: Ø 25 mm
• Fixation: permanent, three-screw floor plate
• Rope: 6 mm semi-elastic, single, clip-on (sold separately)
• Weight: approx. 1 kg — very lightweight
• European manufacture

Complete the barrier with the LINE range

The MINI FIX sits within a coherent range that allows you to unify the aesthetic of an entire gallery room. To close a row neatly along a wall, the wall terminal returns the rope to the wall surface and prevents visitors from bypassing the barrier at the end. The A4 poster holder, the card holder, and the acrylic sleeve add a label or instruction panel without breaking the low barrier line. For a taller stand-off distance on the same visitor route, LINE posts at 90 cm provide visual continuity using the same black graphic language. These removable safety bollards can be combined freely across formats for a fully unified installation.

Installation guidance

Around a plinth or showcase, position the bollards symmetrically to preserve the visual harmony of the presentation. Maintain a spacing of 2 to 2.5 m between two posts, reduced to 1.5 m on very smooth or polished floors, and up to 2 m on surfaces with good grip. Always tension the rope to obtain a perfectly straight low line that underlines the boundary without dramatising it.

With its permanent floor fixation, its 45 cm height, and its assertive black finish, this floor-mount protective bollard offers museums, galleries, and showrooms a permanent, discreet, and reliable barrier that protects the plinth or showcase while keeping the artwork firmly at the centre of attention. As a long-standing choice among European cultural institutions, these removable safety bollards deliver the reliability and visual refinement that public venues demand.

Typical applications in museums and galleries

In heritage venues and commercial showrooms alike, the LINE MINI FIX black bollard is routinely deployed to create a clean rope barrier around low display pedestals, jewellery cases, and sculptural pieces at floor level. Its floor-plate fixation is particularly valued by institutions subject to public-liability requirements, where a repositionable weighted post would not meet the venue's risk-assessment standards. Event venues hosting art fairs and design exhibitions also rely on this format to delimit exhibitor stands with a minimal visual footprint — the 45 cm height keeps sightlines open while the black finish harmonises with dark exhibition plinths and lighting rigs.

FAQ

• Can the rope be ordered at the same time as the bollard? The 6 mm semi-elastic rope is a separate line item — choose your preferred colour (black, white, grey, red, blue, green, or yellow) and add it to your basket when ordering the bollard.
• Is this bollard suitable for outdoor use? The LINE MINI FIX is designed and rated for indoor use. The matte black RAL 9005 powder-coat finish is optimised for interior environments such as museums, galleries, showrooms, and heritage buildings.
• What tools are needed for installation? Fixing the floor plate requires a drill appropriate to your floor type and a 8 mm Allen key (sold separately); tightening the rope clip uses a 4 mm Allen key (also sold separately).