STANDARD white wall-mounted belt unit - 9m

Wall-Mounted Strap Dispenser STANDARD White - Clean and Discreet Crowd Control over 9 m

Where aesthetics matter as much as safety, the white STANDARD wall mounted strap dispenser from the Safety range stands out as the obvious choice. Hospitals, pharmacies, hotels, medical spaces, showrooms: the white finish blends seamlessly into your architectural environment without ever detracting from it, while providing reliable crowd control over 9 m. This wall mounted strap dispenser is designed for professionals who refuse to compromise on appearance.

White: Neutrality, Cleanliness, Trust

In environments sensitive to hygiene or design, intrusive crowd control equipment damages the customer experience. The white STANDARD housing visually recedes while fully performing its function: a self-braking 9 m retractable strap, suitable for indoor and outdoor use, with instant retraction when no longer needed. Weight: 1 kg. Whether you manage a private clinic or a luxury hotel lobby, this wall mounted strap dispenser integrates naturally into your décor.

Customise Your Strap - Your Brand in Clean Spaces

The 9 m strap can be printed with your logo or instructions via high-definition sublimation printing. Against a white background, your message stands out immediately - whether in a clinic, pharmacy, or upscale hotel. Your colours and logo are embedded into the strap itself for a durable result that will not peel or fade at the surface. Online configurator available, graphic designers included, proof submitted before printing. Customisation available directly at order.

Safety Range: Four Colours for Every Zone

The white STANDARD strap dispenser completes a cohesive range available in black, red, and yellow. Each colour corresponds to a precise signalling zone: adopt a unified colour code across all your sites. Mechanism tested for 200,000 cycles - built for intensive daily use. An essential guarantee for public buildings, public tenders, and institutions subject to regulated procurement requirements.

Designed for Long-Term Use in B2B Environments

This white wall-mounted strap dispenser is particularly suited to healthcare facilities, corporate reception areas, hotel lobbies, and retail environments across the UK and international markets. Trade shows and exhibitions often require clean, professional crowd management solutions that do not draw attention away from displays - this unit excels in that context. Should a component fail, spare parts (strap and housing) are available separately from the European manufacturer, avoiding full unit replacement and eliminating planned obsolescence.

European manufacturing

Warranties & certifications

Every Potelet® is designed and manufactured in Europe, laboratory tested and covered by a manufacturer warranty.

  • European manufactureDesigned and manufactured in EuropeDesigned and manufactured in Europe: material traceability and quality controls at every production stage.
  • ISO 9001Certified qualitySpring and belt produced under certified ISO 9001 quality management, with full traceability from production.
  • ISO 14001Environmental managementISO 14001 certified production: controlled environmental impact, recyclable materials, water-based sublimation inks.
  • 200,000 cyclesLaboratory testedRetractor laboratory tested over 200,000 retraction cycles. Spring technology derived from automotive seat belts.
  • 2-year warrantyManufacturer warrantyTwo-year manufacturer warranty, extended to five years on head and metal frame.
  • Wheelchair accessibleDDA compliantDDA compliant: low profile that does not hinder people with reduced mobility and remains detectable with a white cane.
Gamme
STANDARD
Matériau
Acier
Couleur du poteau
White
Longueur de la sangle/corde
9m
Sangle personnalisable
Oui
Utilisation recommandée
Intérieur/extérieur
Weight
1kg
En stock
Non
Garantie
2 ans
Code TARIC
39021000

Wall-Mounted Strap Dispenser STANDARD White - 9m

Réf. : D/SF/MC9/BL
D/SF/MC9/BL
Mechanism tested for 200,000 cycles. Proven retractable strap dispenser built for intensive daily use.
High-definition sublimation printing. Your colours and logo embedded into the strap - durable, no peeling or fading. Online configurator, free graphic design, proof before printing.
Part broken? Replace just that part, not the whole unit. European manufacturer: strap and housing available separately. No planned obsolescence.
Bespoke solutions: reserved for key accounts and loyal clients. Contact us to discover what we can design specifically for your institution.
€124.99
Production/delivery: 1-2 weeks*i
Tax excluded
Sangle :
Finition :
Embout de sangle :
Quantity:

A question? Call us:   0032 87 84 10 20
Free shipping from €500 excl. VAT !

Volume discounts

Up to -20% on bulk orders
QuantityPrice per unitYour savings
per unit124,99 €-
From 4 units122,49 €-2%save 10,00 €
From 6 units121,87 €-2,5%save 18,75 €
From 8 units121,24 €-3%save 30,00 €
From 10 units118,74 €-5%save 62,50 €
From 20 units115,62 €-7,5%save 187,48 €
From 30 units112,49 €-10%save 374,97 €
From 40 units109,37 €-12,5%save 624,95 €
From 50 units106,24 €-15%save 937,43 €
From 70 units103,12 €-17,5%save 1531,13 €
From 100 units99,99 €-20%save 2499,80 €

Unit prices excl. VAT. Discount automatically applied in the cart.

Related products

Recommended accessories for this product

Frequently asked questions

The mounting plate of this white STANDARD wall-mounted dispenser has 4 screws with discreet heads. To preserve a painted or tiled wall finish, use wall plugs suited to the substrate (Molly for plasterboard, expansion for concrete) and fill the drill holes with matching paint filler if necessary. The white housing blends in on white, light grey or beige walls with no visible colour break. During installation, centre the plate carefully at chest height (110 to 130 cm) to ensure the strap extends perfectly horizontally.
The white lacquered ABS plastic housing of the STANDARD dispenser resists fingerprints and can be cleaned regularly with a damp cloth and a little soap. Coloured marks (pens, felt-tip pens) can be removed with a standard non-abrasive household cleaning product. In medical settings (where disinfection cycles are frequent), prefer isopropanol-based disinfectants (< 70%) to concentrated hypochlorite products, which may yellow white plastics in the long term. The white housing is perfectly suited to spaces cleaned daily, such as hospital corridors or reception halls.
The 9m white strap of this STANDARD wall-mounted dispenser can mark out a walkway or close off an entrance over a span of up to 9 metres. For access widths of 8 to 12 metres (large hospital halls, exhibition halls, galleries), two dispensers positioned opposite each other can be chained together via an intermediate connection ring. At a height of 90 cm, a 9m white strap is also effective for signalling a wet floor area or a temporary work zone in a clean environment.
The white STANDARD wall-mounted dispenser is available with several end fittings: standard end fitting (single hook on ring), magnetic end fitting (built-in magnet, ideal for quick attachment to a metal surface), security end fitting (key lock, suited to restricted-access medical areas) and anti-panic end fitting (quick release in an emergency). In hospital settings, the magnetic end fitting is preferred for its speed of deployment and the absence of prolonged manual contact with surfaces.
Yes, the white 3m wall-mounted dispenser exists in our STANDARD range and is suitable for interior walkways of standard width (1.5 to 3 m): professional kitchen corridors, laboratory access airlocks, HACCP zone entrances. The STANDARD white 3m model is identical to the 9m in terms of construction and finish quality, but its shorter reach is better suited to compact architectural spaces. For large entrances and high-traffic halls, the STANDARD 9m offers the reach needed for effective demarcation.
The white nylon strap of the STANDARD dispenser can be disinfected by wiping with isopropanol wipes or ethanol-based disinfectant solutions (≤ 70%). Avoid concentrated hypochlorite solutions (bleach > 2%), which may weaken the strap fibres in the long term. The strap cannot be sterilised in an autoclave (temperature too high). For use in an operating theatre or a strictly aseptic area, demarcation by strap is not recommended; in care corridors and preparation areas, this dispenser is perfectly suitable with an appropriate daily disinfection protocol.
The white STANDARD wall-mounted dispenser has a fixed 9m customisable textile strap: logos, medical signage or colour coding printed on the strap by sublimation. It is the recommended solution for long indoor spans (reception hall, hospital corridor, fixed marking zone) where the message must be permanently embedded in the strap. The white BASIC housing is a rotating housing with an interchangeable strap, designed for clean indoor environments where the strap needs to be replaced regularly (wear, change of messaging). Both are indoor equipment. For a hospital hall requiring customisation and a 9m span, the STANDARD is recommended.
Yes, the customisable strap of this STANDARD dispenser can carry your logo, signage text (“Access prohibited”, “Area reserved for care staff”) or ISO health pictograms. Printing is carried out by screen printing or high-definition sublimation on the textile strap (indoor version). Select the customisation option directly when creating your order: there is no minimum order quantity and no production set-up fee for usual quantities.
The STANDARD wall-mounted dispenser is standard demarcation equipment compatible with the specifications of hospital and health and social care public contracts. It requires no specific training to use, which makes it easier to integrate into the zone management and access control procedures of healthcare facilities. For any bulk purchase or for specific needs related to a call for tenders, our team is available to provide a full technical data sheet and a tailored price offer.

Customer reviews

No reviews yet
References

They placed their trust in us

Every day, our teams do their utmost to meet your queue management needs and to offer you the highest-quality products. Many companies, retailers and public institutions have already placed their trust in Potelet.eu, and we thank them for it.

ING ING
McDonald's McDonald's
UMONS UMONS
Loterie Nationale Loterie Nationale
NATO / OTAN NATO / OTAN
Porsche Porsche
Louis Vuitton Louis Vuitton
Experimenta Experimenta
Jump XL Jump XL
Tesla Tesla
Museum De Fundatie Museum De Fundatie
Danone Danone
Belfius Belfius
PUMA PUMA
Ville de Namur Ville de Namur
Frittenwerk Frittenwerk
BMW BMW
Chopard Chopard
Circuit de Spa-Francorchamps Circuit de Spa-Francorchamps
ROC — Race of Champions ROC — Race of Champions
Crowne Plaza Crowne Plaza
MediaMarkt MediaMarkt
Pathé Pathé
Rolls-Royce Rolls-Royce
Koekelberg Koekelberg
Alpine Alpine
SNCB SNCB
RTBF RTBF
UGC UGC
SPW — Service public de Wallonie SPW — Service public de Wallonie
Parlement européen Parlement européen
Tunisair Tunisair
Cash Converters Cash Converters
Robert Robert
Playmobil Playmobil
JouéClub JouéClub
FC Bayern München FC Bayern München
Gemeente Maastricht Gemeente Maastricht
AWaP — Wallonie Patrimoine AWaP — Wallonie Patrimoine
Stadt Essen Stadt Essen
Burberry Burberry
Ville de Narbonne Ville de Narbonne
Musée de l'Air et de l'Espace Musée de l'Air et de l'Espace
Cart
Close
Back
Account
Close
Menu
Close